Before you deal with the washing machine repairs Enfield, you should know first how to diagnose the problems of the washing machine in the first place. The main problem a washing machine has is issues with the pumps, water leaks or the washer that refuses to turn on. Check where the leak comes from. The leak usually comes from the standpipe and discharge hose. Adjust the drainage hose when you suspect that there is obstructed flow or if there is a stopped up drain. Another common water leak is from having a loose connection or a bad hose. You can check the back in order to make sure that there are no cuts in a hose or on the connection of a tub fill. The machine has two types of hoses and they are in the cycle system. You can check to see if these hoses are in the best condition.Check the bottom and the back of the washing machine to see if there are leaks there. You have to carefully check the bottom of the washing machine since some possible leaks can be hidden there. Check out if the gasket has been worn out. It may make the water come out at the top of the washtub in a spin cycle. You can raise the top of a washing machine in order to check if they have the gasket there. It is found between two clips at the front. You have to insert a thin-head screwdriver and pry its top up. The two clips are found at its back and they do act like hinges. Other washing machine repairs Enfield may be about the pump. The washing machine does work through the use of centrifugal force. It will not be able to cycle water or drain water when it fails to spin.